Basic Inspection
WARNING: This page is about a different car, the 2018 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
- Inspection without using CAN diagnostic Before performing diagnostics, confirm the followings which may cause a defect in the body integrated unit.
- Measure the battery voltage and check electrolyte.
Standard voltage: 12 V or more
Specific gravity: 1.260 or more
- Check the fuse condition.
Make sure that the fuse with specified ampere rating is used and it is not blown out.
- Check the connecting condition of harness and harness connector.
- Confirm key illumination does not blink with ignition switch turned ON.
- Measure the battery voltage and check electrolyte.
- Inspection using CAN diagnostic
Before performing diagnostics, confirm the followings which may cause a defect in the body integrated unit.
- If the body integrated unit has any settings inconsistent with the vehicle equipment.
- If the body integrated unit has any settings inconsistent with the vehicle equipment due to customization.