LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Automatic Transaxle (Service Information)) >> Transmission Shift Switch >> Unit Inspection

Unit Inspection

WARNING: This page is about a different car, the 2019 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check of transmission shift switch
    1. Resistance inspection
      1. Measure the resistance between the terminals.

        Resistance

        Inspection terminals Inspection conditions Standard value
        3 - 4 Pull the shift switch lever RH (+) side. Less than 10 Ω
        Release the shift switch lever. 1 MΩ or more
        1 - 4 Pull the shift switch lever LH (-) side. Less than 10 Ω
        Release the shift switch lever. 1 MΩ or more
        G12587553Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals