LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Automatic Transaxle (Service Information)) >> Speed Sensor >> Removal

Speed Sensor: Removal

WARNING: This page is about a different car, the 2019 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
  1. Removal of under cover front AL (refer to REMOVAL )
  2. Removal of under cover COMPL T/M (refer to REMOVAL )
  3. Removal of transmission revolution sensor (NT)
    1. Disconnect the connector.
    2. Remove the bolt, and then remove the transmission revolution sensor (NT) and the O-ring.
    G12587432Courtesy of SUBARU OF AMERICA, INC.
  4. Removal of transmission revolution sensor (SP2)
    1. Remove the automatic transmission ASSY. (Refer to REMOVAL )
    2. Disconnect the connector.
    3. Remove the bolt, and then remove the transmission revolution sensor (SP2) and the O-ring.
      G12587433Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals