Speed Sensor: Installation

WARNING: This page is about a different car, the 2019 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.

Installation of transmission revolution sensor (SP2)
1. Apply auto fluid WS to a new O-ring and install it to the transmission revolution sensor (SP2).
2. Install the transmission revolution sensor (SP2) with the bolt.
  Standard value: T=5.4 N.m {55 kgf.cm} {4.0 ft-lbf}
3. Connect the connector.
4. Install the automatic transmission ASSY. (Refer to INSTALLATION )
Installation of transmission revolution sensor (NT)
1. Apply auto fluid WS to a new O-ring and install it to the transmission revolution sensor (NT).
2. Install the transmission revolution sensor (NT) with the bolt.
  Standard value: T=5.4 N.m {55 kgf.cm} {4.0 ft-lbf}
3. Connect the connector.
Installation of under cover COMPL T/M (refer to INSTALLATION )
Installation of under cover front AL (refer to INSTALLATION )
Data monitor check
(Refer to DATA MONITOR/ACTIVE TEST )