Engine Oil Pressure Switch Assembly (FA20): Installation

1. Degrease the threaded portion of engine oil pressure switch ASSY.
2. Apply THREE BOND 1324 to the threaded portion.
   CAUTION: Do not apply THREE BOND 1324 to the oil hole.
   Fig 1: Applying THREE BOND 1324 To Threaded Portion Of Engine Oil Pressure Switch Assy

   Courtesy of SUBARU OF AMERICA, INC.
3. Install the engine oil pressure switch ASSY.

   Standard value: T=18N.m {184kgf.cm} {13.3ft.lbf}

   CAUTION: Do not start the engine within 1 hour after the assembly.
4. Connect the connector of oil pressure switch.

Standard value: T=6.0N.m {61kgf.cm} {4.4ft.lbf}