LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2012 >> Tribeca Premium >> Repair and Diagnosis >> Maintenance >> Procedures >> General Information >> Suspension >> Inspection >> Wheel Arch Height

Wheel Arch Height

  1. Unload the vehicle, so that it is at curb weight.
  2. Check the wheel arch height of the front and rear suspensions to ensure that they are within tolerance. Refer to WHEEL ALIGNMENT Wheel Alignment.
  3. When the wheel arch height is out of standard, visually inspect following components and replace deformed parts.
    • Suspension components [Front strut assembly and rear shock absorber assembly]
    • Parts connecting suspension and body
  4. If none of the components is deformed, replace the suspension with wheel arch height out of specification and adjust the wheel arch height. Refer to FS-6, Wheel Alignment. Refer to WHEEL ALIGNMENT Wheel Alignment.
scientia non olet · About LEMON Manuals