LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2012 >> Tribeca Limited >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Rear Gate Latch Assembly >> Removal

Rear Gate Latch Assembly: Removal

  1. Disconnect the ground cable from battery.
  2. Remove the rear gate trim. Refer to REAR GATE TRIM REMOVAL, Rear Gate Trim.
  3. Disconnect the harness connector of rear gate latch assembly.
  4. Remove the two screws.
    Fig 1: Locating Rear Gate Latch Assembly Screws
    G05033654Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the rear gate latch assembly.
scientia non olet · About LEMON Manuals