LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2012 >> Tribeca Limited >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Anti-Theft System - Security And Locks >> Keyless Entry Control Module >> Removal

Keyless Entry Control Module: Removal

  1. Disconnect the ground cable from battery.
  2. Remove the glove box. Refer to GLOVE BOX REMOVAL, Glove Box.
  3. Remove the nut, disconnect the connector and remove the keyless entry control module.
Fig 1: Locating Keyless Entry Control Module Connector Nut
G05033666Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals