LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2012 >> Outback R >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Cooling System (H4SO)) >> Water Pump >> Removal

Water Pump: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the radiator. Refer to , REMOVAL , Radiator.
  2. Remove the V-belts. Refer to V-BELT .
  3. Remove the crank pulley. Refer to CRANK PULLEY .
  4. Remove the timing belt cover. Refer to TIMING BELT COVER .
  5. Remove the timing belt. Refer to TIMING BELT .
  6. Remove the automatic belt tension adjuster.
    Fig 1: Remove Automatic Belt Tension Adjuster
    G04997824Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the camshaft position sensor. Refer to CAMSHAFT POSITION SENSOR .
  8. Remove the cam sprocket LH. Refer to CAM SPROCKET .
  9. Remove the belt cover No. 2 LH.
    Fig 2: Locating Belt Cover Mounting Bolts
    G04997827Courtesy of SUBARU OF AMERICA, INC.
  10. Remove the tensioner bracket.
    Fig 3: Locating Tensioner Bracket Mounting Bolts
    G07909879Courtesy of SUBARU OF AMERICA, INC.
  11. Disconnect the hose from water pump.
  12. Remove the water pump.
    Fig 4: Identifying Water Pump
    G04997829Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals