LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2012 >> Outback R >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Starting/Charging Systems (H4SO)) >> Battery >> Removal

Section 11 (Starting/Charging Systems (H4SO)): Battery: Removal

WARNING: This page is about a different variant/trim than selected.
  1. After disconnecting the battery ground terminal, remove the terminal cover, then disconnect the positive terminal.
  2. Remove the battery cable holder from the battery rod.
  3. Remove flange nut from the battery rod and remove battery holder.
    Fig 1: Locating Flange Nut On Battery Rod
    G06648717Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the battery.
scientia non olet · About LEMON Manuals