LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2012 >> Outback R >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Fuel Injection Fuel Systems (H4DOTC)) >> Manifold Absolute Pressure Sensor >> Removal

Manifold Absolute Pressure Sensor: Removal

WARNING: This page is about a different car, the 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G07910767Courtesy of SUBARU OF AMERICA, INC.
  3. Disconnect the connector from manifold absolute pressure sensor (A), and remove the filter assembly (B) from intake manifold.
  4. Remove the manifold absolute pressure sensor from the solenoid valve bracket.
    Fig 2: Locating Manifold Absolute Pressure Sensor Mounting Bolt
    G06648861Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals