LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2012 >> Outback R >> Repair and Diagnosis >> Engine Performance >> System >> Engine Diagnostics (H6DO) >> Drive Cycle >> Procedure >> Drive Cycle D >> Diagnostic procedure >> Stuck Diagnosis

Stuck Diagnosis

  1. Make sure that the battery voltage is 10.9 V or more.
  2. Perform the Clear Memory Mode. Refer to , CLEAR MEMORY MODE .
  3. Drive the vehicle for the distance equal to the fuel of 50 l  (13.2 US gal, 11 Imp gal).
    NOTE:
    • It is acceptable to drive the vehicle intermittently.
    • Do not disconnect the battery terminals during stuck diagnosis. (Data will be cleared by disconnecting the battery terminals.)
scientia non olet · About LEMON Manuals