LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2012 >> Outback R >> Repair and Diagnosis (Single Page) >> Steering >> Power Steering >> Power Assisted System Power Steering >> Pipe Assembly >> Installation

Pipe Assembly: Installation

  1. Install each part in the reverse order of removal.

    Tightening torque: 

    Refer to " COMPONENT  " of "General Description". Refer to ,  HOSE AND TANK  , COMPONENT, General Description. 

  2. Fill with recommended power steering fluid and perform air bleeding. Refer to , POWER STEERING FLUID .
    CAUTION: Never start the engine before filling with fluid; otherwise the vane pump may become seized.
scientia non olet · About LEMON Manuals