LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2012 >> Outback R >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Security And Locks >> Security System >> Inspection >> Check Security System Condition Memory

Check Security System Condition Memory

  1. Pull out the key from the ignition switch, or turn the ignition to OFF.
  2. Close all the doors, trunk lid and rear gate.
  3. Open the front hood.
  4. Press the LOCK button of the keyless transmitter or transmitter.
    NOTE: Wait until the security indicator light blinks twice within 0.5 seconds at 2 second intervals.
    If the 30 second monitoring lag has been set, wait for 30 seconds.
  5. Disconnect the ground cable from battery.
  6. Connect the battery ground terminal.
  7. Check that the security indicator light blinks twice within 0.5 seconds at 2 second intervals. When it does not blink, replace the body integrated unit.
scientia non olet · About LEMON Manuals