How To Set The System
- Remove the key from the ignition switch.
- Close all the windows. Close and all doors, rear gate, and the trunk lid.
- Push the LOCK button on the transmitter.
- The keyless buzzer will sound once and the hazard warning lights flash once.NOTE: The system can be set even if the windows are open.
- Check that the security indicator light flashes. If any of the doors or the rear gate is not closed properly, lock operation will not be accomplished when the LOCK button on the transmitter is pushed and therefore the keyless buzzer will not sound nor the hazard warning lights will not flash. When setting the alarm system, activation of the keyless entry system must be confirmed by the sound of keyless buzzer and flashing of the hazard warning lights. When the door, rear gate or trunk lid is closed, they will be automatically locked and the alarm system starts working. The indicator light blinks when the system is set and starts monitoring, and continues to blink until the system is disarmed. When the security indicator lamp is blinking as (B), the system is not ready yet and the alarm will not activate when a door is opened.