LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2012 >> Outback Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Lighting System) >> High-mounted Stop Light >> Removal

High-mounted Stop Light: Removal

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the roof spoiler. Refer to REMOVAL , Roof Spoiler.
  3. Remove the cap and screws, then detach the high-mounted stop light.
    Fig 1: Locating High-Mounted Stop Light Screws
    G05671888Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals