Special Tool

ILLUSTRATION	TOOL NUMBER	DESCRIPTION	REMARKS
Courtesy of SUBARU OF AMERICA, INC.	899524100	PULLER SET	Used for removing the roller bearing (differential). Puller Cap
Courtesy of SUBARU OF AMERICA, INC.	399780104	WEIGHT	Used for measuring preload on the roller bearing.
Courtesy of SUBARU OF AMERICA, INC.	498077000	REMOVER	Used for removing the roller bearing of the drive pinion shaft. Used for removing the transfer driven gear taper roller bearing.
Courtesy of SUBARU OF AMERICA, INC.	498077600	CENTER DIFFERENTIAL BEARING REMOVER	Used for removing the center differential cover ball bearing.
Courtesy of SUBARU OF AMERICA, INC.	498147001	DEPTH GAUGE	Used for measuring the main shaft play.
Courtesy of SUBARU OF AMERICA, INC.	498247001	MAGNET BASE	Used for measuring backlash between the side gear and pinion, and the hypoid gear. Used together with DIAL GAUGE (498247100).
Courtesy of SUBARU OF AMERICA, INC.	498247100	DIAL GAUGE	Used for measuring backlash between the side gear and pinion, and the hypoid gear. Used together with MAGNET BASE (498247001).
Courtesy of SUBARU OF AMERICA, INC.	18667AA020	HOLDER	Used for securing the drive pinion shaft assembly and the driven gear assembly when removing the drive pinion shaft assembly lock nut.
Courtesy of SUBARU OF AMERICA, INC.	498937000	TRANSMISSION HOLDER	Used for removing and installing the lock nut of the transmission main shaft.
Courtesy of SUBARU OF AMERICA, INC.	499277100	BUSHING 1-2 INSTALLER	Used for installing the 1st driven gear thrust plate and the 1st-2nd driven gear bushing. Used for installing the roller bearing outer race to the differential case.
Courtesy of SUBARU OF AMERICA, INC.	499277200	INSTALLER	Used for press-fitting the 2nd driven gear, roller bearings, 3rd-4th driven gear, 5th driven gear and the 6th driven gear onto the driven shaft.
Courtesy of SUBARU OF AMERICA, INC.	499757002	INSTALLER	Used for installing the roller bearing of transfer driven gear (transfer case side).
Courtesy of SUBARU OF AMERICA, INC.	18630AA010	WRENCH COMPL RETAINER	Used for removing and installing the differential side retainer. WRENCH COMPL RETAINER (18658AA020) can also be used.
Courtesy of SUBARU OF AMERICA, INC.	18722AA000	REMOVER	Used for removing the 5th drive gear and 6th drive gear.
Courtesy of SUBARU OF AMERICA, INC.	499877000	RACE 4-5 INSTALLER	Used for installing the 4th, 5th and 6th needle bearing races and ball bearings onto the transmission main shaft. Used together with REMOVER (899714110).
Courtesy of SUBARU OF AMERICA, INC.	499917500	DRIVE PINION GAUGE ASSY	Used for adjusting the drive pinion shim.
Courtesy of SUBARU OF AMERICA, INC.	499927100	HANDLE	Used for backlash adjustment of the hypoid gear and preload measurement of the roller bearing.
Courtesy of SUBARU OF AMERICA, INC.	499937100	TRANSMISSION STAND	Used for disassembling and assembling the transmission.
Courtesy of SUBARU OF AMERICA, INC.	499987003	SOCKET WRENCH (35)	Used for removing and installing the main shaft lock nut.
Courtesy of SUBARU OF AMERICA, INC.	499987300	SOCKET WRENCH (50)	Used for removing and installing the driven gear assembly lock nut.
Courtesy of SUBARU OF AMERICA, INC.	899714110	REMOVER	Used for removing and installing the parts of transmission main shaft, drive pinion and rear drive shaft.
Courtesy of SUBARU OF AMERICA, INC.	899864100	REMOVER	Used for removing and installing the parts of transmission main shaft, and the transfer driven gear roller bearing.
Courtesy of SUBARU OF AMERICA, INC.	18680AA020	HOLDER	Used for removing and installing the drive pinion lock nut.
Courtesy of SUBARU OF AMERICA, INC.	899904100	REMOVER	Used for removing and installing the straight pin.
Courtesy of SUBARU OF AMERICA, INC.	398497701	ADAPTER	Used for installing roller bearing onto the differential case. Used together with BUSHING 1-2 INSTALLER (499277100).
Courtesy of SUBARU OF AMERICA, INC.	498057300	INSTALLER	Used for installing the extension oil seal.
Courtesy of SUBARU OF AMERICA, INC.	498255400	PLATE	Used for measuring backlash.
Courtesy of SUBARU OF AMERICA, INC.	398527700	PULLER ASSY	Used for removing the extension case roller bearing. Used for removing the extension oil seal. Used for removing the front differential side retainer bearing outer race. Used for removing the front differential side retainer oil seal.
Courtesy of SUBARU OF AMERICA, INC.	398643600	GAUGE	Used for measuring total end play, extension end play and drive pinion height.
Courtesy of SUBARU OF AMERICA, INC.	398177700	INSTALLER	Used for fitting the transfer drive shaft. Used for installing the roller bearing of the transfer driven gear. Used for installing the 4th needle bearing race of transmission main shaft.
Courtesy of SUBARU OF AMERICA, INC.	28399SA010	OIL SEAL PROTECTOR	Used for protecting the oil seal from damage when inserting the front drive shaft.
Courtesy of SUBARU OF AMERICA, INC.	18675AA000	DIFFERENTIAL SIDE OIL SEAL INSTALLER	Used for installing the differential side retainer oil seal.
Courtesy of SUBARU OF AMERICA, INC.	398791700	SPRING PIN REMOVER 2	Used for installing and removing the spring pin.
Courtesy of SUBARU OF AMERICA, INC.	18662AA010	SOCKET (27)	Used for removing and installing the drive pinion lock nut.
Courtesy of SUBARU OF AMERICA, INC.	899754112	PRESS	Used for removing the driven gear and roller bearing of the driven shaft. Used to install the main shaft ball bearing.
Courtesy of SUBARU OF AMERICA, INC.	18631AA000	HANDLE	Used for installing transfer case assembly and extension case assembly.
Courtesy of SUBARU OF AMERICA, INC.	18762AA000	COMPRESSOR SPECIAL TOOL	Used for removing the 1st driven gear of drive pinion.
Courtesy of SUBARU OF AMERICA, INC.	18654AA000	INSTALLER	Used for installing the 2nd driven gear bushing of driven shaft.
Courtesy of SUBARU OF AMERICA, INC.	18657AA000	INSTALLER	Used for installing the transfer case oil seal.
Courtesy of SUBARU OF AMERICA, INC.	41099AJ000	SPECIAL TOOL H4	Used for removing and installing transmission.
Courtesy of SUBARU OF AMERICA, INC.	99099AJ000	Engine hanger	Used for removing and installing transmission. Used together with CHAIN BALANCER (99099AJ010) and sling chain (general tool).
Courtesy of SUBARU OF AMERICA, INC.	99099AJ010	CHAIN BALANCER	Used for removing and installing transmission. (Weight of 350 kg (772 lb) is supported) Used together with ENGINE HANGER (99099AJ000) and sling chain (general tool). Used to hang the engine while balancing it with the sling chain inserted in this tool.
Courtesy of SUBARU OF AMERICA, INC.	498267200	CYLINDER HEAD TABLE	Used for installing and removing the roller bearing of the transfer case.
Courtesy of SUBARU OF AMERICA, INC.	498267300	CYLINDER HEAD TABLE	Used for installing and removing the roller bearing of the transfer case.
Courtesy of SUBARU OF AMERICA, INC.	18763AA000	COMPRESSOR SHAFT	Used for installing and removing the needle bearing of the transfer case.
Courtesy of SUBARU OF AMERICA, INC.	498277200	STOPPER SET	Used for installing the needle bearing of the transfer case. Use only the spacer.