LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> Transmission >> Clutch >> Clutch System >> Clutch Fluid >> Replacement

Clutch Fluid: Replacement

CAUTION:
  • Use new FMVSS No. 116 DOT3.
  • Cover the air breather with cloth to prevent clutch fluid from being splashed on surrounding parts when loosening the breather.
  • Avoid mixing clutch fluid of different brands to prevent fluid performance from degrading.
  • Be careful not to allow dirt or dust to enter the reservoir tank.
NOTE:
  • During bleeding operation, keep the clutch reservoir tank filled with clutch fluid to prevent entry of air.
  • Clutch pedal must be operated very slowly.
  • Bleed air from the oil line with help of a co-worker.
  • The amount of clutch fluid required is approximately 70 m λ (2.4 US fl oz, 2.5 Imp fl oz) for total clutch system.
  1. Remove the collector cover. (turbo model)
  2. Remove the air intake boot assembly. (non-turbo model) Refer to AIR INTAKE BOOT .
  3. Remove the intercooler. (turbo model) Refer to INTERCOOLER .
  4. Thoroughly drain the clutch fluid from the reservoir tank.
  5. Refill the reservoir tank with recommended clutch fluid.

    Recommended clutch fluid: 

    New FMVSS No. 116 DOT3 

  6. Bleed air from the clutch fluid. Refer to Clutch Fluid Air Bleeding .
  7. Install the air intake boot assembly. (non-turbo model) Refer to AIR INTAKE BOOT .
  8. Install the intercooler. (turbo model) Refer to INTERCOOLER .
  9. Install the collector cover. (turbo model)
scientia non olet · About LEMON Manuals