Section 5 (Engine Cooling System (H6DO)): Thermostat: Installation

WARNING: This page is about a different variant/trim than selected.

Install a gasket to thermostat.
NOTE: Use a new gasket.
Install the thermostat and thermostat cover.
NOTE: Install the parts with the jiggle pin facing the upside.

Tightening torque:

6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

Fig 1: Locating Thermostat Cover Jiggle Pins
Courtesy of SUBARU OF AMERICA, INC.
Install the radiator lower hose to the radiator lower and the thermostat cover.

Fig 2: Identifying Radiator Lower Hose
Courtesy of SUBARU OF AMERICA, INC.
Install the under cover. Refer to FRONT UNDER COVER .
Lower the vehicle.
Fill engine coolant. Refer to , FILLING OF ENGINE COOLANT .