LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Drivetrain System) >> Propeller Shaft >> Inspection >> Joints And Connections

Joints And Connections

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the center exhaust pipe.
  2. Remove the heat shield cover.
  3. Check for any looseness of the yoke flange mounting bolts which connect to the rear differential and center bearing bracket mounting bolts.
scientia non olet · About LEMON Manuals