Sunroof Motor: Removal
WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- When removing the clip, use great care not to damage the roof trim.
- Never rotate the motor assembly after removing it.
- Completely close the glass lid.
- Disconnect the ground cable from battery.
- Remove the roof trim. Refer to ROOF TRIM REMOVAL, Roof Trim.
- Disconnect the harness connector, and then remove the motor assembly mounting screw.
CAUTION:
When removing the motor assembly, secure the cable wires to prevent moves.