Rear Bushing

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.

Put an alignment mark on the front arm based on the center of rear bushing recess portion.
CAUTION: Always put an alignment mark for aligning the position on bushing installation.

Fig 1: Identifying Alignment Mark For Aligning Position On Bushing
Courtesy of SUBARU OF AMERICA, INC.
Using the ST and a press, remove the rear bushing.
ST1 20299AG000 REMOVER

ST2 20299AG010 BASE

Fig 2: Identifying Rear Bushing
Courtesy of SUBARU OF AMERICA, INC.