LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Wiper System & Washer System) >> Wiper Relay Unit >> Removal

Wiper Relay Unit: Removal

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from the battery.
  2. Remove the wiper arm. Refer to REMOVAL , Front Wiper Arm.
  3. Remove the cowl panel. Refer to REMOVAL , Cowl Panel.
  4. Disconnect connector (A) of the wiper motor assembly.
  5. Remove bolt (B) and clip (C).
  6. Disconnect connector (D) of the wiper relay unit.
    Fig 1: Identifying Wiper Relay Unit Connector
    G05033411Courtesy of SUBARU OF AMERICA, INC.
    NOTE: Unit body, bracket, and rubber mount is an assembly component and cannot be disassembled.
scientia non olet · About LEMON Manuals