LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Automatic Transmission) >> Oil Pump Cover >> Removal

Oil Pump Cover: Removal

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission assembly from vehicle body. Refer to REMOVAL , Automatic Transmission Assembly.
  2. Pull out the torque converter assembly. Refer to REMOVAL , Torque Converter Assembly.
  3. Remove the transmission harness connector from stay.
  4. Remove the oil charge pipe. Refer to REMOVAL , Oil Charge Pipe.
  5. Remove the ATF inlet and outlet pipes. Refer to REMOVAL , ATF Cooler Pipe and Hose.
  6. Separate the converter case and transmission case. Refer to REMOVAL , Converter Case.
  7. Remove the oil pump cover mounting bolt, and then separate the oil pump cover from the AT main case by lightly tapping with plastic hammer.
    Fig 1: Identifying Oil Pump Cover Mounting Bolts
    G05022338Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals