LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Lighting System) >> Front Fog Light Assembly >> Removal

Front Fog Light Assembly: Removal

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from the battery.
  2. Disengage the three clips, and then turn over the lower mud guard.
  3. Disconnect the harness connector.
  4. Remove the two mounting bolts, and pull and detach the fog light assembly.
    Fig 1: Identifying Front Fog Light Assembly
    G05033361Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals