Buckle Switch

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.

How to disconnect:
1. Move the slide lock (A) in the direction of arrow.
2. While holding the slide lock (A) in moved position, disconnect the connector.
  CAUTION: When pulling the slide lock or disconnecting connector, be sure to hold the connector, not the harness.
  
  Fig 1: Disconnecting Buckle Switch Connector
  Courtesy of SUBARU OF AMERICA, INC.
How to connect:
Holding the connector (A), and push it in carefully until a clicking sound is heard.

CAUTION: Be sure to insert the connector in until it is locked. Then pull it lightly to make sure that it is locked.

Fig 2: Connecting Buckle Switch Connector
Courtesy of SUBARU OF AMERICA, INC.