LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Lubrication (H4SO) >> Oil Pressure Switch >> Removal

Oil Pressure Switch: Removal

  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G07909787Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the generator. Refer to GENERATOR .
  3. Disconnect the terminal from oil pressure switch.
    Fig 2: Locating Terminal On Oil Pressure Switch
    G06648557Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the oil pressure switch.
    Fig 3: Locating Oil Pressure Switch
    G06648558Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals