LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Locks >> Trunk Opener Switch >> Inspection >> Trunk Opener Cancel Button

Trunk Opener Cancel Button

  1. Disconnect the trunk opener cancel button connector.
  2. Measure the resistance between trunk opener cancel button terminals.

    Preparation tool: Circuit tester 

    Terminal No. Inspection conditions Specification
    1 - 2 Switch ON Less than 1 Ω
    Switch OFF 1 MΩ or more
  3. Replace the trunk opener button if the inspection result is not within the standard value.
scientia non olet · About LEMON Manuals