Real-time Diagnosis: Operation
- Select {Current Data Display & Save} in << Engine Diagnosis >> display screen.
- Make sure that normal display is shown when operated as follows:
- Depress and release the brake pedal. (Stop light switch and brake switch are turned ON.)
- Turn the "CRUISE" switch to ON.
- Turn the "CANCEL" switch to ON.
- Turn the "SET/-" switch to ON.
- Turn the "RES/+" switch to ON.
- Depress or release the clutch switch.
- Place the shift lever in any position other than neutral.
NOTE:
For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".