LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis (Single Page) >> Suspension >> Wheels & Tire System >> Tire Pressure Monitoring System Diagnostics >> Control Module I/O Signal >> Electrical Specification

Electrical Specification

Fig 1: Identifying Control Module Connector Terminal
G07914049Courtesy of SUBARU OF AMERICA, INC.
Terminal No. Content Measured value and measuring conditions Remarks
1 - - -
2 Tire pressure warning light output Illuminate when malfunction occurs, or tire pressure decreases System failure: blinks 25 times → illuminates
Tire pressure decreases: turns on
3 Speed sensor signal While driving (Pulse signal) Change according to vehicle speed
4 Ignition power supply IG switch ON (Battery voltage) -
5 Ground 0 V (Always) -
6 Battery power supply Battery voltage (Always) -
7 - - -
8 - - -
9 - - -
10 - - -
11 Body integrated unit - -
12 Select monitor communication Serial communication -