LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2012 >> Outback Base, Automatic CVT Trans >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Rear Suspension >> Rear Lateral Link >> Assembly

Rear Lateral Link: Assembly

  1. Before assembly, inspect the following items and replace any faulty part with a new one.
    • Visually check the rear lateral link for damage and deformation.
    • Visually check the bushing for abnormal cracks, fatigue or damage.
  2. Using the ST, press the bushing into place.

    PREPARATION TOOL: 

    ST-A & ST-B: INSTALLER & REMOVER (20299AE010) 

    Fig 1: Pressing Bushing Using ST
    G07914033Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals