Curtain Airbag Sensor: Installation

CAUTION:

Do not reuse the bolt and nut.
Always use new bolts and nuts for them.
When installing the sensor, securely insert the arrest pin on the back side of sensor into the mounting hole on the body.

Before installation, inspect the following items and replace any faulty part with a new one.
- The curtain airbag sensor or connector are damaged.
- Curtain airbag is deployed.
Install each part in the reverse order of removal.

CAUTION: If the hook is removed from vehicle body, replace the hook with the new part to avoid the deterioration of seat securing.

Fig 1: Identifying Hook

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

Curtain airbag sensor: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)