LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2012 >> Outback Base, Automatic CVT Trans >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag System (Service Information) >> Airbag Connector >> Procedure >> Passenger's Airbag Module

Passenger's Airbag Module

  1. How to disconnect:
    CAUTION: When pulling the slide lock or disconnecting connector, be sure to hold the connector, not the harness.
    1. Push the slide lock (A) in the direction of arrow.
    2. With the slide lock pushed, disconnect the connector.
    Fig 1: Pushing Passengers Airbag Module Slide Lock
    G06653084Courtesy of SUBARU OF AMERICA, INC.
  2. How to connect:
    CAUTION: Be sure to insert the connector in until it is locked. Then pull it gently to make sure that it is locked.

    Holding the connector, push it in securely until a clicking sound is heard.

    Fig 2: Pushing Passengers Airbag Module Slide Lock In
    G05003907Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals