LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2012 >> Outback Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Diagnostic Trouble Code (DTC) Detecting Criteria (H6DO)) >> Diagnostic Trouble Code (DTC) Detecting Criteria >> DTC P1602 Control Module Programming Error >> Enable Condition

Enable Condition

WARNING: This page is about a different variant/trim than selected.
Secondary Parameters Enable Conditions
Atmospheric pressure ≥ 75 kPa (563 mmHg, 22.2 inHg)
Battery voltage ≥ 10.9 V
Cold start diagnosis Incomplete
Vehicle speed < 2 km/h (1.2 MPH)
Misfire in 200 engine revs. < 5
Elapsed time after starting the engine = 14 s