Function Check
WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
In order to check the body integrated unit function, inspect the body integrated unit and actuator using Subaru Select Monitor without operating switches.
- On «Main Menu» display, select {Each System Check}.
- On «System Selection Menu» display, select {Integ. unit mode}.
- On «Integ. unit mode failure diag» display, select {Function check}.
- Select the item to be operated on the «Function check» display screen and select the [OK].
- Pressing [OK] starts, [NO] cancels the operation and [OK] returns to the System Operation Check Mode display screen.
NOTE:
If not equipped (based on area or condition), process will not go on.