Read Current Data: Operation
WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
- On «Main Menu» display, select {Each System Check}.
- On «System Selection Menu» display, select {Integ. unit mode}.
- On «Integ. unit mode failure diag» display, select {Current Data Display & Save}.
- On «Data Display Menu» display, select {Data Display}.
- Using the scroll key, scroll the display screen up or down until the desired data is shown.
Refer to DISPLAY OF CURRENT DATA , OPERATION, Subaru Select Monitor. Refer to CONFIRMATION OF CURRENT SETTING , OPERATION, Subaru Select Monitor.