LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2012 >> Outback Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Anti-Theft System - Security And Locks) >> Rear Gate Latch Assembly >> Removal

Rear Gate Latch Assembly: Removal

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the rear gate trim. Refer to REAR GATE TRIM REMOVAL, Rear Gate Trim.
  3. Disconnect the harness connector of rear gate latch assembly.
  4. Remove the two screws.
    Fig 1: Locating Rear Gate Latch Assembly Screws
    G05033654Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the rear gate latch assembly.
scientia non olet · About LEMON Manuals