Rear Brake Pad: Removal

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.

Lift up the vehicle, and then remove the rear wheels.
Remove the brake hose bracket.

Fig 1: Locating Brake Hose Bracket
Courtesy of SUBARU OF AMERICA, INC.
Remove the caliper bolt.

Fig 2: Locating Caliper Bolt
Courtesy of SUBARU OF AMERICA, INC.
Raise the caliper body and support it.
NOTE: Do not disconnect the brake hose from the caliper body.
Remove the pad.

Fig 3: Removing Pad

Courtesy of SUBARU OF AMERICA, INC.