DTC C0041 Parameter Selection Error: Trouble Symptom
- ABS does not operate.
- EBD does not operate.
- VDC does not operate.
- Hill start assist does not operate.
NOTE:
When the VDCCM & H/U is replaced, this DTC may be stored.
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK VDCCM & H/U IDENTIFICATION SYMBOL. Check the identification symbol attached on the H/U. Identification symbol: V1 |
Is the identification symbol correct? | Go to step 2 . | Replace the VDCCM & H/U. Refer to VDC CONTROL MODULE AND HYDRAULIC CONTROL UNIT (VDCCM & H/U) . |
| 2 CHECK PARAMETER SELECTED IN VDCCM. Refer to , PARAMETER CHECK , OPERATION, Subaru Select Monitor. |
Does the parameter registered in the VDCCM match the relevant vehicle? | Replace the VDCCM & H/U. Refer to VDC CONTROL MODULE AND HYDRAULIC CONTROL UNIT (VDCCM & H/U) . | Select and register the correct parameter. Refer to , PARAMETER SELECTION , OPERATION, Subaru Select Monitor. |