LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2012 >> Legacy Base, Automatic CVT Trans >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System >> License Plate Light >> Removal >> Sedan Model

Sedan Model

  1. Disconnect the ground cable from battery.
  2. Remove the trunk lid trim. Refer to TRUNK ROOM TRIM .
  3. Remove the trunk lid garnish. Refer to TRUNK LID GARNISH .
  4. Disconnect the connector and remove the bulb socket.
    Fig 1: Disconnecting Bulb Socket And Connector
    G06653483Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the license plate light.
    Fig 2: Removing License Plate Light
    G06653484Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals