VDC OFF Switch: Removal

Remove the cover assembly - instrument panel LWR driver.
1. Remove the clips, and remove the cover - instrument panel side LH.
  
  Fig 1: Removing Instrument Panel Side LH Clips
  Courtesy of SUBARU OF AMERICA, INC.
  
  NOTE: Using a plastic remover, open the cover - instrument panel side LH.
2. Remove the screws and release the clips and claws.
3. Disconnect the harness connectors, and remove the cover assembly - instrument panel LWR driver OUT.
  
  Fig 2: Locating Instrument Panel Mounting Bolt
  Courtesy of SUBARU OF AMERICA, INC.
Remove the screws and release the claws, then detach the cover.

Fig 3: Identifying Instrument Panel Cover Mounting Clips And Screw
Courtesy of SUBARU OF AMERICA, INC.
Release the claws and remove the VDC OFF switch.

Fig 4: Identifying VDC Off Switch Claws
Courtesy of SUBARU OF AMERICA, INC.