LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2012 >> Impreza Base, 4D Sedan, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 44 (Vehicle Dynamics Control System (WRX-STI)) >> VDC Mode Change Switch >> Removal

VDC Mode Change Switch: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: VDC mode change switch is equipped with STI model only, and it is also used as VDC OFF switch.
  1. Remove the instrument panel lower cover. < Ref. to REMOVAL , Instrument Panel Lower Cover. >
  2. Remove the screws, and then remove the VDC mode change switch.
    Fig 1: Identifying VDC Mode Change Switch Connector Terminals
    G07689973Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals