Rear ABS Wheel Speed Sensor: Installation
WARNING: This page is about a different variant/trim than selected.
CAUTION:
Be careful not to damage the sensor.
Install each part in the reverse order of removal.
Tightening torque:
Sensor:
7.5 N.m (0.76 kgf-m, 5.5 ft-lb)
Bracket:
7.5 N.m (0.76 kgf-m, 5.5 ft-lb)
NOTE:
Check the identification (mark) on the harness to make sure there is no warpage. (RH: P5 (White), LH: P6 (Yellow))