LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2012 >> Impreza Base, 4D Sedan, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H4DO) (Except WRX-STI) >> Tumble Generator Valve Assembly >> Inspection >> Check Motor

Check Motor

  1. Connect the battery positive terminal to terminal No. 5 and the battery ground terminal to terminal No. 4, and check that the valve is fully opened on LH side and the valve is fully closed on RH side.
    CAUTION: Do not power the motor for more than 10 seconds.
    Fig 1: Identifying Fully Open (LH Side) And Fully Closed (RH Side) Tumble Generator Valve Position
    G08315441Courtesy of SUBARU OF AMERICA, INC.
  2. Connect the battery positive terminal to terminal No. 4 and the battery ground terminal to terminal No. 5, and check that the valve is fully closed on LH side and the valve is fully opened on RH side.
    CAUTION: Do not power the motor for more than 10 seconds.
    Fig 2: Identifying Fully Open (RH Side) And Fully Closed (LH Side) Tumble Generator Valve Position
    G08315442Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals