LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2012 >> Impreza Base, 4D Sedan, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H4DO) (Except WRX-STI) >> Tumble Generator Valve Actuator >> Removal

Tumble Generator Valve Actuator: Removal

  1. Disconnect the ground cable from battery.
    Fig 1: Connecting/Disconnecting Battery Ground Cable
    G08317298Courtesy of SUBARU OF AMERICA, INC.
  2. Disconnect the connector (A) from tumble generator valve assembly, and remove the tumble generator valve actuator.
    • LH side
      Fig 2: Locating Tumble Generator Valve Assembly Connector Mounting Bolts (LH Side)
      G08315446Courtesy of SUBARU OF AMERICA, INC.
    • RH side
      Fig 3: Locating Tumble Generator Valve Assembly Connector Mounting Bolts (RH Side)
      G08315447Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals