Universal Joint: Installation

Align the cutout portion at serrated section of the column shaft and yoke, then install the universal joint into column shaft.

Fig 1: Sectional View Of Column Shaft And Yoke
Courtesy of SUBARU OF AMERICA, INC.
Install the universal joint to the serrations of gearbox assembly by matching alignment marks.
Tighten the bolts on the gearbox side first, and then the column shaft side.
CAUTION: Be sure to follow the tightening order and tightening torque of universal joint to avoid the steering effort from becoming heavy.

Tightening torque:

24 N.m (2.45 kgf-m, 17.7 ft-lb)

Clearance between coupling of universal joint and turbo cover:

15 mm (0.59 in) or more
Align the center position of the roll connector. < Ref. to ADJUSTMENT , Roll Connector. >
Install the steering wheel. < Ref. to INSTALLATION , Steering Wheel. >