Abs Warning Light Does Not Go Off: Trouble Symptom
WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
When starting the engine, the ABS warning light is kept ON.
| Step | Check | Yes | No |
|---|---|---|---|
| 1 READ DTC. Read the DTC. Refer to , READ DIAGNOSTIC TROUBLE CODE (DTC) . |
Is DTC displayed? | Perform the diagnosis according to DTC. Refer to , LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . | Go to step 2 . |
| 2 CHECK LAN SYSTEM. Perform the diagnosis for LAN system. Refer to OPERATION . |
Is there any fault in LAN system? | Perform the diagnosis according to DTC for LAN system. Refer to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . | Go to step 3 . |
| 3 CHECK COMBINATION METER. Check the combination meter. Refer to SELF-DIAGNOSIS DISPLAY MODE . |
Is combination meter OK? | Replace the VDCCM & H/U. Refer to VDC CONTROL MODULE AND HYDRAULIC CONTROL UNIT (VDCCM & H/U) . | Replace the combination meter. Refer to COMBINATION METER . |