Front Bushing
WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Before assembly, inspect the following items and replace any faulty part with a new one.
- Check the front arm for damage or cracks, and replace if defective.
- Visually check the bushing for abnormal cracks, fatigue or damage.
- Visually check the dust cover on the ball joint for damage.
- Align the gap of bushing intermediate plate for front bushing with the alignment mark of the front arm.
- Using the ST and a press, remove the front bushing.
PREPARATION TOOL:
ST: INSTALLER & REMOVER SET (927680000)