Rear Brake Pad: Inspection
WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Check the pad thickness (A).NOTE:
- Always replace the pads of both wheels and both sides as a set.
- Replace pad clips if they are twisted or worn.
- Replace the pad if there is oil or grease on it.
- A wear indicator is installed on the inner disc brake pad. If the pad is worn to the limit, the end of wear indicator contacts disc rotor, and a squeaking sound is heard as the wheel rotates. If the sound is heard, replace the pad.
Disc rotor type Standard Wear limit Pad thickness (A) Solid 9 mm (0.35 in) 1.5 mm (0.059 in) Ventilated 11 mm (0.43 in) 1.5 mm (0.059 in) - If the wear limit is exceeded in the inspection, replace the brake pad.