Rear Differential Front Member: Removal: Installation
WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
Install the rear differential front member with a new self-locking nut.
Tightening torque:
T1: 50 N.m (5.1 kgf-m, 36.9 ft-lb)
T2: 110 N.m (11.2 kgf-m, 81.1 ft-lb)
Fig 1: Rear Differential Front Member Self-Locking Nuts With Torque Specification